lukasandClaude Opus 5
2251c7ca6d
`sed "s|^KEY=.*|KEY=value|"` only rewrites a line that already exists. A setting introduced by a later release is absent from an older .env, so the substitution matched nothing, reported success, and the value vanished — while `ensure_secrets` printed "RSPAMD_CONTROLLER_PASSWORD was empty — generated one". The v1.1.0 upgrade then ran with a blank controller password: every compose call warned, the engine came up unauthenticated, and learning would have failed against it. Classification was unaffected, which is exactly what made it quiet. Now appends when the key is absent — ensuring the file ends in a newline first, so the key cannot be glued onto the last line of a hand-edited .env — and verifies the value is present afterwards rather than trusting sed's exit status. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_018SqJYt7jD7oUEkoY68sBZo
648 lines
28 KiB
Bash
Executable File
648 lines
28 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Webmail operator control script. One command per thing you might need to do.
|
|
#
|
|
# ./deploy/webmail.sh init create data dirs + a filled-in .env.prod
|
|
# ./deploy/webmail.sh pull [tag] fetch prebuilt images from your registry
|
|
# ./deploy/webmail.sh up [--meili] start (builds images if missing)
|
|
# ./deploy/webmail.sh down stop (data is untouched)
|
|
# ./deploy/webmail.sh status what is running, and which version
|
|
# ./deploy/webmail.sh logs [svc] [-f] tail logs
|
|
# ./deploy/webmail.sh update [tag] backup -> new images -> migrate -> roll -> health-gate
|
|
# ./deploy/webmail.sh rollback [tag] go back to the previous version
|
|
# ./deploy/webmail.sh backup take a verified database dump now
|
|
# ./deploy/webmail.sh restore <file> DESTRUCTIVE: restore a dump
|
|
# ./deploy/webmail.sh reindex [args] rebuild the search index from Postgres
|
|
# ./deploy/webmail.sh psql open a database shell
|
|
# ./deploy/webmail.sh shell [svc] shell inside a container (default: api)
|
|
# ./deploy/webmail.sh show-key print MASTER_KEY so you can back it up
|
|
# ./deploy/webmail.sh doctor check the install before it bites you
|
|
set -euo pipefail
|
|
|
|
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
|
ROOT_DIR="$(dirname "$SCRIPT_DIR")"
|
|
COMPOSE_FILE="${ROOT_DIR}/docker-compose.yml"
|
|
ENV_FILE="${ROOT_DIR}/.env"
|
|
LEGACY_ENV_FILE="${ROOT_DIR}/docker/.env.prod"
|
|
ENV_EXAMPLE="${ROOT_DIR}/docker/.env.prod.example"
|
|
|
|
# Services that must come back healthy after a roll.
|
|
HEALTH_SERVICES=(postgres redis api web)
|
|
HEALTH_TIMEOUT=120
|
|
|
|
red() { printf '\033[31m%s\033[0m\n' "$*"; }
|
|
grn() { printf '\033[32m%s\033[0m\n' "$*"; }
|
|
ylw() { printf '\033[33m%s\033[0m\n' "$*"; }
|
|
die() { red "error: $*" >&2; exit 1; }
|
|
|
|
# QNAP keeps Container Station's `docker` and `docker-compose` inside the QPKG
|
|
# directory, which is NOT on the PATH of an ordinary SSH session — the script
|
|
# would otherwise die with "no compose found" on a box that has both. The volume
|
|
# name differs between QTS (CACHEDEV1_DATA) and QuTS hero (the ZFS pool name),
|
|
# so glob rather than hard-code it. No-op everywhere else.
|
|
ensure_docker_on_path() {
|
|
command -v docker >/dev/null 2>&1 && return 0
|
|
local dir
|
|
for dir in /share/*/.qpkg/container-station/bin /share/.qpkg/container-station/bin; do
|
|
if [ -x "$dir/docker" ]; then
|
|
PATH="$dir:$PATH"
|
|
export PATH
|
|
ylw "using Container Station's docker from $dir"
|
|
return 0
|
|
fi
|
|
done
|
|
return 0 # not found: let the caller fail with its own, clearer message
|
|
}
|
|
|
|
# Which compose is on this box. Synology DSM and QNAP QTS/QuTS hero ship the
|
|
# standalone `docker-compose` binary and may have no `docker compose`
|
|
# subcommand, so detect rather than assume. COMPOSE_WAIT is empty on v1, which
|
|
# has no `--wait`; the script's own health_gate covers that case.
|
|
COMPOSE_BIN=()
|
|
COMPOSE_WAIT=""
|
|
detect_compose() {
|
|
[ "${#COMPOSE_BIN[@]}" -gt 0 ] && return 0
|
|
ensure_docker_on_path
|
|
if docker compose version >/dev/null 2>&1; then
|
|
COMPOSE_BIN=(docker compose)
|
|
elif command -v docker-compose >/dev/null 2>&1; then
|
|
COMPOSE_BIN=(docker-compose)
|
|
else
|
|
die "no compose found: neither 'docker compose' nor 'docker-compose' is available"
|
|
fi
|
|
local ver
|
|
ver="$("${COMPOSE_BIN[@]}" version 2>/dev/null | head -1)"
|
|
case "$ver" in
|
|
*v2.*|*" 2."*) COMPOSE_WAIT="--wait" ;;
|
|
*) COMPOSE_WAIT=""
|
|
ylw "compose v1 detected (${ver:-unknown}) — using the script's own health checks" ;;
|
|
esac
|
|
}
|
|
|
|
compose() {
|
|
detect_compose
|
|
"${COMPOSE_BIN[@]}" --env-file "$ENV_FILE" -f "$COMPOSE_FILE" "$@"
|
|
}
|
|
|
|
# Read KEY=VALUE pairs the way compose's .env parser does, WITHOUT sourcing.
|
|
# Sourcing would execute the file as shell — it would choke on an ordinary
|
|
# value containing spaces (ENABLED_PLUGINS) and would run anything else that
|
|
# found its way into the file that holds the master key.
|
|
load_env_file() {
|
|
local line key val
|
|
while IFS= read -r line || [ -n "$line" ]; do
|
|
case "$line" in ''|'#'*) continue ;; esac
|
|
case "$line" in *=*) ;; *) continue ;; esac
|
|
key="${line%%=*}"
|
|
val="${line#*=}"
|
|
# Trim whitespace around the key; strip one layer of surrounding quotes.
|
|
key="$(printf '%s' "$key" | tr -d '[:space:]')"
|
|
case "$val" in
|
|
\"*\") val="${val#\"}"; val="${val%\"}" ;;
|
|
\'*\') val="${val#\'}"; val="${val%\'}" ;;
|
|
esac
|
|
[ -n "$key" ] && export "${key}=${val}"
|
|
done < "$1"
|
|
}
|
|
|
|
require_env() {
|
|
migrate_legacy_env
|
|
[ -f "$ENV_FILE" ] || die "$ENV_FILE not found. Run: ./deploy/webmail.sh init"
|
|
# The env file is chmod 600 and usually owned by root (init is run as root
|
|
# on a NAS), and the data directories are root-owned too. Say so plainly
|
|
# instead of letting a bare "Permission denied" escape from a redirect.
|
|
if [ ! -r "$ENV_FILE" ]; then
|
|
red "error: cannot read $ENV_FILE (it holds the master key, so it is chmod 600)." >&2
|
|
red "You are running as $(id -un). Re-run this with sudo:" >&2
|
|
red " sudo $0 ${SUBCOMMAND:-<command>}" >&2
|
|
red "Or start a root shell for the session: sudo -i" >&2
|
|
exit 1
|
|
fi
|
|
load_env_file "$ENV_FILE"
|
|
[ -n "${DATA_ROOT:-}" ] || die "DATA_ROOT is not set in $ENV_FILE"
|
|
[ -n "${MASTER_KEY:-}" ] || die "MASTER_KEY is not set in $ENV_FILE"
|
|
[ -n "${POSTGRES_PASSWORD:-}" ] || die "POSTGRES_PASSWORD is not set in $ENV_FILE"
|
|
}
|
|
|
|
state_dir() { echo "${DATA_ROOT}/state"; }
|
|
|
|
# busybox sed (what you may get on DSM/QTS) has no -i suffix argument, so every
|
|
# in-place edit goes through a temp file.
|
|
set_env_value() {
|
|
local key="$1" value="$2"
|
|
if grep -q "^${key}=" "$ENV_FILE" 2>/dev/null; then
|
|
sed "s|^${key}=.*|${key}=${value}|" "$ENV_FILE" > "${ENV_FILE}.tmp" \
|
|
&& mv "${ENV_FILE}.tmp" "$ENV_FILE"
|
|
else
|
|
# A key introduced by a later release is simply absent from an older
|
|
# .env, and `sed s|^KEY=.*|` substitutes nothing while reporting success
|
|
# — so a generated secret was announced and then silently dropped. Append
|
|
# instead, after making sure the file ends in a newline so the new key
|
|
# cannot be glued onto the last line.
|
|
if [ -s "$ENV_FILE" ] && [ -n "$(tail -c1 "$ENV_FILE")" ]; then
|
|
printf '\n' >> "$ENV_FILE"
|
|
fi
|
|
printf '%s=%s\n' "$key" "$value" >> "$ENV_FILE"
|
|
fi
|
|
chmod 600 "$ENV_FILE"
|
|
# Never report success for a value that did not land: this function silently
|
|
# dropped a generated secret once, and the install only failed much later.
|
|
grep -q "^${key}=" "$ENV_FILE" || die "failed to write ${key} to ${ENV_FILE}"
|
|
}
|
|
|
|
record_version() {
|
|
local new="$1" cur
|
|
mkdir -p "$(state_dir)" 2>/dev/null || true
|
|
if ! { : > "$(state_dir)/.probe"; } 2>/dev/null; then
|
|
ylw "cannot write ${DATA_ROOT}/state — version history not recorded (run as the owner of DATA_ROOT)"
|
|
return 0
|
|
fi
|
|
rm -f "$(state_dir)/.probe"
|
|
cur="$(cat "$(state_dir)/version" 2>/dev/null || echo "")"
|
|
[ -n "$cur" ] && [ "$cur" != "$new" ] && echo "$cur" > "$(state_dir)/previous"
|
|
echo "$new" > "$(state_dir)/version"
|
|
}
|
|
|
|
# --- commands ----------------------------------------------------------------
|
|
|
|
apply_init_flags() {
|
|
[ -n "$set_data_root" ] && set_env_value DATA_ROOT "$set_data_root" && echo " DATA_ROOT = $set_data_root"
|
|
[ -n "$set_domain" ] && set_env_value APP_DOMAIN "$set_domain" && echo " APP_DOMAIN = $set_domain"
|
|
[ -n "$set_tz" ] && set_env_value TZ "$set_tz" && echo " TZ = $set_tz"
|
|
[ -n "$set_port" ] && set_env_value WEB_PORT "$set_port" && echo " WEB_PORT = $set_port"
|
|
[ -n "$set_bind" ] && set_env_value WEB_BIND "$set_bind" && echo " WEB_BIND = $set_bind"
|
|
return 0
|
|
}
|
|
|
|
# Earlier versions kept config at docker/.env.prod with a `.env` symlink beside
|
|
# it. Synology's Container Manager did not pick that up, so the real file now
|
|
# lives at the project root. Move an existing one across (keeping its master
|
|
# key) and leave a symlink behind so older notes still work.
|
|
migrate_legacy_env() {
|
|
[ -e "$ENV_FILE" ] && return 0
|
|
[ -f "$LEGACY_ENV_FILE" ] || return 0
|
|
[ -L "$LEGACY_ENV_FILE" ] && return 0
|
|
mv "$LEGACY_ENV_FILE" "$ENV_FILE"
|
|
chmod 600 "$ENV_FILE"
|
|
ln -sf ../.env "$LEGACY_ENV_FILE" 2>/dev/null || true
|
|
ylw "moved docker/.env.prod -> .env (Container Manager reads .env from the project folder)"
|
|
}
|
|
|
|
# Fill in required secrets that are present-but-empty (a migrated file from an
|
|
# older layout, or a hand-written .env). NEVER touches a MASTER_KEY that already
|
|
# has a value: replacing it would make every stored mail-account credential
|
|
# undecryptable.
|
|
ensure_secrets() {
|
|
local current
|
|
current="$(sed -n 's/^MASTER_KEY=//p' "$ENV_FILE" | head -1)"
|
|
if [ -z "$current" ]; then
|
|
set_env_value MASTER_KEY "$(openssl rand -base64 32)"
|
|
ylw "MASTER_KEY was empty — generated a new one. Back it up: webmail.sh show-key"
|
|
fi
|
|
current="$(sed -n 's/^POSTGRES_PASSWORD=//p' "$ENV_FILE" | head -1)"
|
|
if [ -z "$current" ]; then
|
|
set_env_value POSTGRES_PASSWORD "$(openssl rand -base64 24 | tr -d '/+=' | cut -c1-24)"
|
|
ylw "POSTGRES_PASSWORD was empty — generated one"
|
|
fi
|
|
# Internal only: the antispam engine's controller. Nobody types this — the
|
|
# admin panel authenticates humans with the ordinary administrator account
|
|
# and holds this to talk to Rspamd. Nothing is lost if it is regenerated.
|
|
current="$(sed -n 's/^RSPAMD_CONTROLLER_PASSWORD=//p' "$ENV_FILE" | head -1)"
|
|
if [ -z "$current" ]; then
|
|
set_env_value RSPAMD_CONTROLLER_PASSWORD \
|
|
"$(openssl rand -base64 24 | tr -d '/+=' | cut -c1-24)"
|
|
ylw "RSPAMD_CONTROLLER_PASSWORD was empty — generated one"
|
|
fi
|
|
}
|
|
|
|
cmd_init() {
|
|
# Settings can be passed as flags so the whole install can be driven from a
|
|
# NAS GUI (DSM Task Scheduler / QTS cron), with no editing of a hidden
|
|
# dotfile in File Station. Re-running with flags updates those values.
|
|
local set_data_root="" set_domain="" set_tz="" set_port="" set_bind=""
|
|
while [ "$#" -gt 0 ]; do
|
|
case "$1" in
|
|
--data-root) set_data_root="${2:-}"; shift 2 ;;
|
|
--domain) set_domain="${2:-}"; shift 2 ;;
|
|
--tz) set_tz="${2:-}"; shift 2 ;;
|
|
--port) set_port="${2:-}"; shift 2 ;;
|
|
--bind) set_bind="${2:-}"; shift 2 ;;
|
|
-h|--help)
|
|
echo "usage: webmail.sh init [--data-root PATH] [--domain DOMAIN] [--tz ZONE] [--port N] [--bind IP]"
|
|
return 0 ;;
|
|
*) die "init: unknown option $1" ;;
|
|
esac
|
|
done
|
|
|
|
migrate_legacy_env
|
|
if [ ! -f "$ENV_FILE" ]; then
|
|
cp "$ENV_EXAMPLE" "$ENV_FILE"
|
|
chmod 600 "$ENV_FILE"
|
|
local master pgpass
|
|
master="$(openssl rand -base64 32)"
|
|
pgpass="$(openssl rand -base64 24 | tr -d '/+=' | cut -c1-24)"
|
|
# Portable in-place edit (BSD and GNU sed disagree about -i).
|
|
sed "s|^MASTER_KEY=.*|MASTER_KEY=${master}|; s|^POSTGRES_PASSWORD=.*|POSTGRES_PASSWORD=${pgpass}|" \
|
|
"$ENV_FILE" > "${ENV_FILE}.tmp" && mv "${ENV_FILE}.tmp" "$ENV_FILE"
|
|
chmod 600 "$ENV_FILE"
|
|
# Compatibility shim for notes that reference the old path.
|
|
[ -e "$LEGACY_ENV_FILE" ] || ln -s ../.env "$LEGACY_ENV_FILE" 2>/dev/null || true
|
|
grn "created $ENV_FILE with freshly generated secrets"
|
|
ylw ""
|
|
ylw " >> BACK UP MASTER_KEY NOW. Copy it into your password manager. <<"
|
|
ylw " Without it, saved mail-account passwords cannot be decrypted even"
|
|
ylw " from a perfect database backup."
|
|
ylw ""
|
|
ensure_secrets
|
|
apply_init_flags
|
|
if [ -n "$set_data_root" ]; then
|
|
grn "configured from flags; you can go straight to: webmail.sh up"
|
|
else
|
|
echo "Then edit $ENV_FILE and set at least: DATA_ROOT, APP_DOMAIN, TZ, WEB_PORT."
|
|
echo "(or re-run: webmail.sh init --data-root ... --domain ... --tz ... --port ...)"
|
|
fi
|
|
return 0
|
|
fi
|
|
|
|
ensure_secrets
|
|
if [ -n "${set_data_root}${set_domain}${set_tz}${set_port}${set_bind}" ]; then
|
|
apply_init_flags
|
|
grn "updated $ENV_FILE"
|
|
else
|
|
ylw "$ENV_FILE already exists; leaving it alone."
|
|
fi
|
|
require_env
|
|
mkdir -p "${DATA_ROOT}"/{postgres,blobs,redis,backups,meili,state} 2>/dev/null \
|
|
|| ylw "could not create every directory under ${DATA_ROOT} (the init container will)"
|
|
grn "data directories ready under ${DATA_ROOT}"
|
|
}
|
|
|
|
cmd_doctor() {
|
|
require_env
|
|
local ok=0
|
|
|
|
if [ ! -s "$ENV_FILE" ]; then
|
|
red " $ENV_FILE is missing or empty — nothing will start. Run: webmail.sh init" >&2
|
|
fi
|
|
|
|
echo "config:"
|
|
echo " DATA_ROOT ${DATA_ROOT}"
|
|
echo " APP_DOMAIN ${APP_DOMAIN:-<unset>}"
|
|
echo " WEB_PORT ${WEB_PORT:-8088}"
|
|
echo " ADMIN_PORT ${ADMIN_PORT:-8089} (keep this one LAN-only)"
|
|
echo " SEARCH_BACKEND ${SEARCH_BACKEND:-pg}"
|
|
echo " IMAGE_TAG ${IMAGE_TAG:-local}"
|
|
echo
|
|
|
|
if [ "$(printf '%s' "${MASTER_KEY}" | base64 -d 2>/dev/null | wc -c)" -ne 32 ]; then
|
|
red " MASTER_KEY is not 32 bytes of base64 — the app will refuse to start"; ok=1
|
|
else
|
|
grn " MASTER_KEY looks well-formed"
|
|
fi
|
|
|
|
if [ -z "${POSTGRES_PASSWORD:-}" ]; then
|
|
red " POSTGRES_PASSWORD is empty — Postgres will refuse to initialise"; ok=1
|
|
fi
|
|
|
|
if [ "$(stat -c %a "$ENV_FILE" 2>/dev/null || echo 600)" != "600" ]; then
|
|
ylw " $ENV_FILE is not chmod 600 (it holds your master key)"
|
|
fi
|
|
|
|
# Missing directories are not a failure before the first start: `up` and the
|
|
# `init` container create them. Only say so, so a pre-install doctor is green.
|
|
local missing=0
|
|
for d in postgres blobs redis backups state; do
|
|
[ -d "${DATA_ROOT}/${d}" ] || missing=1
|
|
done
|
|
if [ "$missing" -eq 1 ]; then
|
|
ylw " data directories not created yet — 'up' will create them"
|
|
else
|
|
grn " data directories present"
|
|
fi
|
|
|
|
# Probe the nearest existing ancestor: the NFS/SMB check has to work BEFORE
|
|
# the first install, which is the only time it can still save you.
|
|
local fstype probe="${DATA_ROOT}"
|
|
while [ ! -d "$probe" ] && [ "$probe" != "/" ] && [ -n "$probe" ]; do
|
|
probe="$(dirname "$probe")"
|
|
done
|
|
# `|| true`: with `set -e -o pipefail`, df failing on a not-yet-created
|
|
# DATA_ROOT would abort doctor on exactly the run where you need it most.
|
|
fstype="$(df -PT "$probe" 2>/dev/null | awk 'NR==2{print $2}' || true)"
|
|
[ -n "$fstype" ] || fstype="$(stat -f -c %T "$probe" 2>/dev/null || echo "")"
|
|
case "$fstype" in
|
|
nfs*|cifs|smbfs|fuse*)
|
|
red " ${DATA_ROOT} is on a network filesystem — Postgres WILL corrupt there."
|
|
red " Move DATA_ROOT to a local volume (btrfs/ext4)."; ok=1 ;;
|
|
"") ylw " could not determine the filesystem of ${DATA_ROOT}" ;;
|
|
*) grn " ${DATA_ROOT} is on a local filesystem" ;;
|
|
esac
|
|
|
|
local avail
|
|
avail="$(df -Pm "$probe" 2>/dev/null | awk 'NR==2{print $4}' || true)"
|
|
[ -n "$avail" ] && {
|
|
if [ "$avail" -lt 5120 ]; then ylw " only ${avail} MB free on ${DATA_ROOT}"
|
|
else grn " ${avail} MB free on ${DATA_ROOT}"; fi
|
|
}
|
|
|
|
# A plugin shipped in the image but absent from ENABLED_PLUGINS never gets its
|
|
# tables created, and then fails at runtime rather than at install. The
|
|
# entrypoint's default is the list of what ships, so compare against that
|
|
# instead of duplicating it here.
|
|
local shipped missing=""
|
|
shipped="$(sed -n 's/^: "${ENABLED_PLUGINS:=\(.*\)}"/\1/p' "${ROOT_DIR}/docker/entrypoint.sh")"
|
|
if [ -n "${ENABLED_PLUGINS:-}" ] && [ -n "$shipped" ]; then
|
|
local p
|
|
for p in $shipped; do
|
|
case " ${ENABLED_PLUGINS} " in *" $p "*) ;; *) missing="${missing} $p" ;; esac
|
|
done
|
|
if [ -n "$missing" ]; then
|
|
ylw " ENABLED_PLUGINS is missing:${missing}"
|
|
echo " these ship in the image but will have no tables created."
|
|
echo " fix: add them to ENABLED_PLUGINS in ${ENV_FILE}, then: webmail.sh update"
|
|
else
|
|
grn " ENABLED_PLUGINS covers every plugin in the image"
|
|
fi
|
|
fi
|
|
|
|
if command -v ss >/dev/null 2>&1; then
|
|
local p
|
|
for p in "WEB_PORT:${WEB_PORT:-8088}" "ADMIN_PORT:${ADMIN_PORT:-8089}"; do
|
|
if ss -ltn 2>/dev/null | grep -q ":${p#*:} "; then
|
|
ylw " port ${p#*:} already has a listener — change ${p%%:*} if that is not us"
|
|
fi
|
|
done
|
|
fi
|
|
|
|
# chmod 700 and owned by uid 999, so count them as root in a container.
|
|
local recent
|
|
recent="$(docker run --rm -v "${DATA_ROOT}/backups:/b:ro" alpine:3.20 \
|
|
sh -c 'find /b -maxdepth 1 -name "*.dump" -mtime -2 2>/dev/null | wc -l' 2>/dev/null || echo 0)"
|
|
if [ "${recent:-0}" -gt 0 ]; then grn " ${recent} database backup(s) from the last 48 h"
|
|
else ylw " no database backup in the last 48 h"; fi
|
|
|
|
[ "$ok" -eq 0 ] && grn "doctor: no blocking problems" || red "doctor: problems found (above)"
|
|
return "$ok"
|
|
}
|
|
|
|
cmd_up() {
|
|
require_env
|
|
local profile=() build=()
|
|
for arg in "$@"; do
|
|
case "$arg" in
|
|
--meili) profile=(--profile meili) ;;
|
|
--build) build=(--build) ;;
|
|
*) die "unknown option: $arg" ;;
|
|
esac
|
|
done
|
|
[ "${SEARCH_BACKEND:-pg}" = "meili" ] && [ ${#profile[@]} -eq 0 ] && {
|
|
ylw "SEARCH_BACKEND=meili — starting the Meilisearch container too"
|
|
profile=(--profile meili)
|
|
}
|
|
# DATA_ROOT must exist before compose runs: Synology's Docker daemon will
|
|
# not create a missing bind-mount source, it just fails the container. The
|
|
# `init` service creates the subdirectories from there.
|
|
mkdir -p "${DATA_ROOT}" 2>/dev/null || true
|
|
if [ ! -d "${DATA_ROOT}" ]; then
|
|
die "cannot create ${DATA_ROOT} (running as $(id -un)). Create it first:
|
|
sudo mkdir -p ${DATA_ROOT}
|
|
then re-run this command."
|
|
fi
|
|
detect_compose
|
|
# ${arr[@]+"${arr[@]}"} rather than plain "${arr[@]}": under `set -u`, bash
|
|
# 4.3 and older — which is what QuTS hero ships — treats expanding an EMPTY
|
|
# array as an unbound variable and aborts. The +-form expands to nothing at
|
|
# all when the array is empty, and is identical otherwise.
|
|
# shellcheck disable=SC2086
|
|
compose ${profile[@]+"${profile[@]}"} up -d ${build[@]+"${build[@]}"} $COMPOSE_WAIT
|
|
health_gate || die "services did not come up healthy — check: ./deploy/webmail.sh logs"
|
|
record_version "${IMAGE_TAG:-local}"
|
|
grn "up. open http://<this-host>:${WEB_PORT:-8088}/"
|
|
echo " admin: http://<this-host>:${ADMIN_PORT:-8089}/ — restrict this port to your LAN"
|
|
}
|
|
|
|
# First install from a registry: `up` only builds what is missing locally, and
|
|
# `update` refuses to run without an existing database to back up. This is the
|
|
# gap between them — fetch the images, then `up` starts them instead of building.
|
|
cmd_pull() {
|
|
require_env
|
|
local tag="${1:-${IMAGE_TAG:-local}}"
|
|
[ "${REGISTRY_PREFIX:-webmail}" = "webmail" ] && die \
|
|
"REGISTRY_PREFIX is still the local default — nothing to pull from.
|
|
Set REGISTRY_PREFIX and IMAGE_TAG in ${ENV_FILE}, or use: webmail.sh up --build"
|
|
detect_compose
|
|
IMAGE_TAG="$tag" compose pull || die "pull failed — is the registry reachable and logged in?"
|
|
grn "pulled ${REGISTRY_PREFIX}/{backend,web}:${tag}. Next: ./deploy/webmail.sh up"
|
|
}
|
|
|
|
cmd_down() { require_env; compose --profile meili down; grn "stopped (data kept in ${DATA_ROOT})"; }
|
|
cmd_restart() { require_env; compose restart "${@:-}"; }
|
|
|
|
cmd_status() {
|
|
require_env
|
|
compose --profile meili ps
|
|
echo
|
|
echo "recorded version : $(cat "$(state_dir)/version" 2>/dev/null || echo unknown)"
|
|
echo "previous version : $(cat "$(state_dir)/previous" 2>/dev/null || echo none)"
|
|
local running
|
|
running="$(compose exec -T api python -c \
|
|
"import urllib.request,json;print(json.load(urllib.request.urlopen('http://127.0.0.1:8000/api/version'))['version'])" \
|
|
2>/dev/null || echo unreachable)"
|
|
echo "running version : ${running}"
|
|
echo
|
|
# The data directories are owned by the container users (postgres 999,
|
|
# backend 10001) and backups are chmod 700, so read them as root inside a
|
|
# throwaway container rather than reporting misleading zeroes.
|
|
docker run --rm -v "${DATA_ROOT}:/d:ro" alpine:3.20 sh -c '
|
|
echo "data usage:"
|
|
du -sh /d/postgres /d/blobs /d/backups 2>/dev/null | sed "s|/d/| |"
|
|
echo
|
|
echo "latest backups:"
|
|
ls -lh /d/backups/*.dump 2>/dev/null | tail -3 | sed "s|/d/backups/| |" || echo " none yet"
|
|
'
|
|
}
|
|
|
|
cmd_logs() {
|
|
require_env
|
|
compose --profile meili logs --tail 200 "$@"
|
|
}
|
|
|
|
health_gate() {
|
|
local deadline=$(( $(date +%s) + HEALTH_TIMEOUT )) svc cid state
|
|
while [ "$(date +%s)" -lt "$deadline" ]; do
|
|
local all_ok=1
|
|
for svc in "${HEALTH_SERVICES[@]}"; do
|
|
cid="$(compose ps -q "$svc" 2>/dev/null || true)"
|
|
[ -n "$cid" ] || { all_ok=0; break; }
|
|
state="$(docker inspect -f '{{if .State.Health}}{{.State.Health.Status}}{{else}}{{.State.Status}}{{end}}' "$cid" 2>/dev/null || echo missing)"
|
|
case "$state" in
|
|
healthy|running) ;;
|
|
*) all_ok=0; break ;;
|
|
esac
|
|
done
|
|
[ "$all_ok" -eq 1 ] && return 0
|
|
sleep 5
|
|
done
|
|
return 1
|
|
}
|
|
|
|
cmd_backup() {
|
|
require_env
|
|
compose run --rm backup once
|
|
}
|
|
|
|
cmd_update() {
|
|
require_env
|
|
local target="${1:-${IMAGE_TAG:-local}}"
|
|
local previous="${IMAGE_TAG:-local}"
|
|
|
|
echo "== 1/5 backing up the database before anything changes"
|
|
cmd_backup || die "backup failed — refusing to update. Fix the backup first."
|
|
|
|
echo "== 2/5 obtaining images for tag '${target}'"
|
|
if [ "${REGISTRY_PREFIX:-webmail}" = "webmail" ] || [ "$target" = "local" ]; then
|
|
IMAGE_TAG="$target" compose build
|
|
else
|
|
IMAGE_TAG="$target" compose pull || die "pull failed — nothing has changed, you are still on ${previous}"
|
|
fi
|
|
|
|
echo "== 3/5 applying migrations"
|
|
IMAGE_TAG="$target" compose run --rm migrate \
|
|
|| die "migration failed — services untouched, still on ${previous}. Restore from ${DATA_ROOT}/backups if the schema is damaged."
|
|
|
|
echo "== 4/5 rolling services"
|
|
# Workers first (leases transfer to the replacement within ~90 s; the lease
|
|
# protocol and idempotent (mailbox_id, uid) upserts make this lossless),
|
|
# then the API, then the web front end.
|
|
IMAGE_TAG="$target" compose up -d worker-sync worker-jobs
|
|
IMAGE_TAG="$target" compose up -d api web
|
|
# Converge anything the ordered roll does not name — a release that adds a
|
|
# service (the antispam engine did) would otherwise never start it, and the
|
|
# stack would look updated while missing a container. --no-recreate so this
|
|
# only creates what is absent and leaves the rolled services alone.
|
|
IMAGE_TAG="$target" compose up -d --no-recreate
|
|
|
|
echo "== 5/5 health gate (${HEALTH_TIMEOUT}s)"
|
|
if health_gate; then
|
|
record_version "$target"
|
|
set_env_value IMAGE_TAG "$target"
|
|
grn "updated to ${target}"
|
|
else
|
|
red "health gate failed — rolling back to ${previous}"
|
|
# shellcheck disable=SC2086
|
|
IMAGE_TAG="$previous" compose up -d $COMPOSE_WAIT || true
|
|
die "update to ${target} failed; production is back on ${previous}"
|
|
fi
|
|
}
|
|
|
|
cmd_rollback() {
|
|
require_env
|
|
local target="${1:-$(cat "$(state_dir)/previous" 2>/dev/null || echo "")}"
|
|
[ -n "$target" ] || die "no previous version recorded; pass a tag: ./deploy/webmail.sh rollback v1.0.0"
|
|
ylw "rolling back to ${target}"
|
|
# shellcheck disable=SC2086
|
|
IMAGE_TAG="$target" compose up -d $COMPOSE_WAIT
|
|
if health_gate; then
|
|
record_version "$target"
|
|
set_env_value IMAGE_TAG "$target"
|
|
grn "rolled back to ${target}"
|
|
else
|
|
die "rollback to ${target} did not come up healthy — check: ./deploy/webmail.sh logs"
|
|
fi
|
|
}
|
|
|
|
cmd_restore() {
|
|
require_env
|
|
local arg="${1:-}" dir base
|
|
[ -n "$arg" ] || die "usage: ./deploy/webmail.sh restore <file.dump> (run \`status\` to list them)"
|
|
|
|
# Backups are chmod 700 owned by uid 999, so a plain `[ -f ]` from an
|
|
# unprivileged shell says "missing" for a file that is right there. Resolve
|
|
# and verify inside a container instead.
|
|
if [ -f "$arg" ]; then
|
|
dir="$(cd "$(dirname "$arg")" && pwd)"; base="$(basename "$arg")"
|
|
else
|
|
dir="${DATA_ROOT}/backups"; base="$(basename "$arg")"
|
|
fi
|
|
if ! docker run --rm -v "${dir}:/b:ro" alpine:3.20 test -f "/b/${base}" 2>/dev/null; then
|
|
red "no such dump: ${base}"
|
|
echo "available in ${DATA_ROOT}/backups:"
|
|
docker run --rm -v "${DATA_ROOT}/backups:/b:ro" alpine:3.20 \
|
|
sh -c 'ls -1 /b/*.dump 2>/dev/null | sed "s|/b/| |"' || true
|
|
exit 1
|
|
fi
|
|
local dump="${dir}/${base}"
|
|
|
|
red "THIS REPLACES THE CURRENT DATABASE with ${base}."
|
|
red "Mail synced since that dump will be gone (it re-syncs from the servers)."
|
|
printf 'Type RESTORE to continue: '
|
|
read -r confirm
|
|
[ "$confirm" = "RESTORE" ] || die "aborted"
|
|
|
|
echo "stopping application containers (postgres stays up)"
|
|
compose stop api worker-sync worker-jobs web backup
|
|
|
|
echo "restoring $(basename "$dump")"
|
|
# --clean --if-exists drops and recreates objects; a single transaction so a
|
|
# failure leaves the old database intact.
|
|
docker run --rm -i --network webmail-prod \
|
|
-e PGPASSWORD="${POSTGRES_PASSWORD}" \
|
|
-v "$(dirname "$dump")":/restore:ro \
|
|
postgres:16 \
|
|
pg_restore --clean --if-exists --no-owner --single-transaction \
|
|
-h postgres -U "${POSTGRES_USER:-webmail}" -d "${POSTGRES_DB:-webmail}" \
|
|
"/restore/$(basename "$dump")" \
|
|
|| die "restore failed; the database was left as it was"
|
|
|
|
echo "starting application containers"
|
|
# shellcheck disable=SC2086
|
|
compose up -d $COMPOSE_WAIT
|
|
health_gate || ylw "services are still starting; check: ./deploy/webmail.sh status"
|
|
grn "restored. If the blob store was lost too, mail bodies will refill on next sync."
|
|
}
|
|
|
|
# Print the master key so it can be backed up without opening a hidden dotfile
|
|
# in File Station. Intended for a one-off DSM Task Scheduler job:
|
|
# bash deploy/webmail.sh show-key > /volume1/docker/webmail/MASTER_KEY.txt
|
|
# copy it into your password manager, then delete that file.
|
|
cmd_show_key() {
|
|
require_env
|
|
echo "MASTER_KEY=${MASTER_KEY}"
|
|
echo
|
|
echo "Copy this into your password manager, then DELETE the file you wrote"
|
|
echo "it to. Without this key, saved mail-account passwords cannot be"
|
|
echo "decrypted from any backup."
|
|
}
|
|
|
|
cmd_reindex() { require_env; compose run --rm api reindex "$@"; }
|
|
cmd_psql() { require_env; compose exec postgres psql -U "${POSTGRES_USER:-webmail}" -d "${POSTGRES_DB:-webmail}"; }
|
|
cmd_shell() { require_env; compose exec "${1:-api}" /bin/sh; }
|
|
|
|
# Print the header comment block, however long it grows.
|
|
usage() { awk 'NR>1 { if ($0 ~ /^#/) { sub(/^# ?/, ""); print } else exit }' "${BASH_SOURCE[0]}"; }
|
|
|
|
cmd="${1:-}"; shift || true
|
|
SUBCOMMAND="$cmd"
|
|
# Before anything touches Docker: on QNAP the binaries are off-PATH (see above).
|
|
# doctor/backup/restore call `docker` directly, not only through compose.
|
|
[ -n "$cmd" ] && ensure_docker_on_path
|
|
case "$cmd" in
|
|
init) cmd_init "$@" ;;
|
|
doctor) cmd_doctor "$@" ;;
|
|
pull) cmd_pull "$@" ;;
|
|
up) cmd_up "$@" ;;
|
|
down) cmd_down "$@" ;;
|
|
restart) cmd_restart "$@" ;;
|
|
status) cmd_status "$@" ;;
|
|
logs) cmd_logs "$@" ;;
|
|
update) cmd_update "$@" ;;
|
|
rollback) cmd_rollback "$@" ;;
|
|
backup) cmd_backup "$@" ;;
|
|
restore) cmd_restore "$@" ;;
|
|
reindex) cmd_reindex "$@" ;;
|
|
show-key) cmd_show_key "$@" ;;
|
|
psql) cmd_psql "$@" ;;
|
|
shell) cmd_shell "$@" ;;
|
|
""|-h|--help|help) usage ;;
|
|
*) die "unknown command: $cmd (try --help)" ;;
|
|
esac
|